Why do you need headlight protection?
Todays acrylic headlights are very expensive to replace. Replacement cost can be from $500 to as high as $2,500 per lamp on some models.
Acrylic headlights do get damaged. Modern acrylic headlights are susceptible to scratches, pits from flying road debris, and fine hair line fractures
that can allow moisture to get into the lens causing fogging. UV damage from sunlight can cause yellowing of the lens and make acrylic brittle.
We offer two models of kits depending on
the level of protection desired.
Lightgard LS is our basic light protection kit. It provides very good
protection from scratches, pits from flying road debris, and fine hair
line fractures that can allow moisture to get into the lens causing
fogging. Both Lightgard film kits have UV inhibitors that help to prevent
hazing and yellowing of the acrylic lens due to exposure to sunlight.
The very best protection for your lights is our UltraLightgard kit. Lightgard is a virtually optically clear film from 3M's Aerospace division. This
film has been tested at 500 mph, simulating the flying speeds of modern jet aircraft. It has also been tested at temperatures down to -30 centigrade
with no damage to the film or adhesive. Used on wing tip lights, landing gear lights and radar nose-cones of jet aircraft, ClearMask Lightgard film is
clearly a better option than stiff, hard to apply, hand laminated alternatives.
Cost will vary due to make and model of vehicle as well as product selected for headlight protection.
Thicker is Not Better!!
Lightgard headlight cover kits are only half the thickness of competitive brands yet offer superior performance and durability. Most manufacturers
of headlamp protection kits boast the use of thick 30-50 mil clear plastic sheet that is hand laminated using generic pressure sensitive adhesives with
no formal testing methods. These products are extremely hard to apply to the compound curves of modern vehicle headlamps and tend to fail,
especially in temperatures below freezing.
Todays acrylic headlights are very expensive to replace. Replacement cost can be from $500 to as high as $2,500 per lamp on some models.
Acrylic headlights do get damaged. Modern acrylic headlights are susceptible to scratches, pits from flying road debris, and fine hair line fractures
that can allow moisture to get into the lens causing fogging. UV damage from sunlight can cause yellowing of the lens and make acrylic brittle.
We offer two models of kits depending on
the level of protection desired.
Lightgard LS is our basic light protection kit. It provides very good
protection from scratches, pits from flying road debris, and fine hair
line fractures that can allow moisture to get into the lens causing
fogging. Both Lightgard film kits have UV inhibitors that help to prevent
hazing and yellowing of the acrylic lens due to exposure to sunlight.
The very best protection for your lights is our UltraLightgard kit. Lightgard is a virtually optically clear film from 3M's Aerospace division. This
film has been tested at 500 mph, simulating the flying speeds of modern jet aircraft. It has also been tested at temperatures down to -30 centigrade
with no damage to the film or adhesive. Used on wing tip lights, landing gear lights and radar nose-cones of jet aircraft, ClearMask Lightgard film is
clearly a better option than stiff, hard to apply, hand laminated alternatives.
Cost will vary due to make and model of vehicle as well as product selected for headlight protection.
Thicker is Not Better!!
Lightgard headlight cover kits are only half the thickness of competitive brands yet offer superior performance and durability. Most manufacturers
of headlamp protection kits boast the use of thick 30-50 mil clear plastic sheet that is hand laminated using generic pressure sensitive adhesives with
no formal testing methods. These products are extremely hard to apply to the compound curves of modern vehicle headlamps and tend to fail,
especially in temperatures below freezing.
Installing LightGard on a Ford Thunderbird
C6 with Lightgard installed
HTP AutoWorks
LightGard
 |
 |
 |
 |
 |
 |
 |
 |
 |
805-757-2910